SplashZen was designed to keep water in the tub where it belongs. During bath time, kids (or dogs) can splash and play without soaking the floor, walls, baseboards, and adults in the room.

The fully-extended splash guard and suction cup strip create a barrier that blocks water from leaving the tub.

It's still possible that some water drops will make it over the edge, but it's MUCH less than using nothing.

SplashZen was designed to fit most bath tubs.

In order for it to work, you must have walls on either side of the tub where you can attach the guard (on one side) and the hooks (on the other side). It also needs a straight, flat tub edge to run along.

The dimension of the guard are 24.8 IN (63 CM) high X 70.8 IN (180 CM) wide. This is the maximum width (with the guard fully extended), so any opening (wall to wall) 70.8 IN will work.

The suction cup barrier strip, which will run along the edge of the tub, is 72 IN (183 CM) wide, but can be cut down to fit a more narrow tub.

See a photo of the dimensions on the Product Page.

SplashZen can be used with kids as soon as they're old enough to sit up on their own in the tub.

It's great for multiple kids tubbing at the same time when messy splashing is more likely.

Use SplashZen with older kids while standing to help them transition to showers. We recommend a removable shower head so you can aim the water in the tub!

SplashZen also works for dogs during their baths by keeping water and shakes where they belong!

Yes! Use SplashZen to turn your bath tub into a dog wash, keeping water and shakes where they belong!

Enjoy washing your fluffy friend like never before and protect your floors, baseboards, walls, clothes, and mood from water damage. 

They are actually the exact same product! While you can purchase them separately on our website:

- SplashZen for Kids
- SplashZen for Dogs

They are identical. That means you can purchase either product and use it to bathe kids, dogs, or both!

For full instructions on how to install SplashZen, visit ourInstruction Page.

SplashZen was built with safety in mind, but use with caution and at your own risk.

To prevent serious injury or death, never leave children unattended while in the bathtub. The SplashZen splash guard is meant to be used under direct adult supervision.

If a child does slip or fall under the water, the material is flexible so you can help them very quickly. Simply grab them over the top and help them up.

Do not use with children who are too young or unstable to keep their head safely above the water during bath activities and play.

To keep children from slipping, we recommend putting an anti-slip material or bath mat on the bottom of the tub.

SplashZen attaches to the walls of your tub using included sticky pads.

These sticky pads are not meant to be removed and re-used, so you should follow the instructions to install SplashZen correctly the first time.

If you need a new set of rectangles or hooks with sticky pads, they can be purchased for a minimal fee HERE (hooks) and HERE (rectangles)

You can remove the main unit from the rectangle pieces and store it. You can also remove the suction cup strip and re-attach it. We recommend removing it by pulling sideways instead of up.

Yes! If you need to remove SplashZen and take it with you to your next home, you can remove the guard, the sticky pads, and the suction cup strip.

The sticky pads are not re-stickable, so you will need to purchase another set to install SplashZen in your new home. They can be purchased for a minimal fee HERE (hooks) and HERE (rectangles).

When removing the suction cup strip to take it with you, we recommend removing it by pulling sideways instead of up.

After use, you should extend and hook the guard to let it dry. This will keep it looking and smelling great.

SplashZen attaches to the walls of your tub using included sticky pads.

These sticky pads are not meant to be removed and re-used, so you should follow the instructions to install SplashZen correctly the first time.

If you need a new set of rectangles or hooks with sticky pads, they can be purchased for a minimal fee HERE (hooks) and HERE (rectangles).

You can remove the main unit from the rectangle pieces and store it. You can also remove the suction cup strip and re-attach it. We recommend removing the suction cup strip by pulling sideways instead of up.

Buying a SplashZen may seem like a big purchase — especially if you're used to buying cheap shower curtains.

SplashZen is the result of years of research and development. We had to get the product to work and work well.

It's also made of high-quality materials that are meant to last. We priced it as affordably as we could to share it with as many families as possible.

SplashZen is an investment in something you will use daily for years and that will drastically improve your quality of life!

Each SplashZen comes with a suction cup strip that can be cut down to size to fit the length of your tub.

By attaching this strip along the lip of the tub, running along the bottom of the guard (facing outside the tub), it keeps water from spilling out underneath the guard.

If you need to remove the suction cup strip, we recommend pulling sideways instead of up.

SplashZen is far superior to a traditional shower curtain when it comes to bathing kids and dogs.

The splash guard material is sturdy, clear, and flexible, allowing you to see and access kids and dogs.

The guard is the perfect height to reach over to wash, brush teeth, interact, and play.

The guard also stays looking and smelling better than a shower curtain because you can leave it extended after use to fully air dry.

SplashZen can stay looking and smelling great if you allow it to dry after use. Do this by extending and hooking it, letting it air dry.

SplashZen is a great way to transition older kids to showers! It's especially useful if you have a removable shower head.

Have them stand in the tub with the SplashZen extended and hooked, and help them shower using the removable shower head.